SKU 38413
For technical questions, please call 1-800-444-3353.
Page 2
Warning:
Common sense and caution are factors which cannot be built into any product. These factors
must be supplied by the operator. Please remember:
1.
Prevent body contact with grounded surfaces such as pipes, radiators, etc.
2.
Stay alert. Never operate equipment or use tools if you are tired.
3.
Do not use this product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgement or reflexes might be impaired.
4.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
5.
Nonskid footwear is recommended.
6.
Wear restrictive hair covering to contain long hair.
7.
Use eye and ear protection. Always wear ANSI approved safety glasses when using equip-
ment or tools.
8.
Keep proper footing and balance at all times.
Work Area
To avoid risk of personal injury, equipment damage, fire and shock, make sure your work area
is:
1.
Free of damp, wet or rainy conditions.
2.
Free of flammable gasses or liquids.
3.
Free of children. Children should never handle tools or operate equipment.
Thank you for choosing a Harbor Freight Tools product! For future reference, please complete
the owner’s record below:
Model:_____________________ Purchase Date:_____________________
Save the receipt and these instructions. It is important that you read the entire instruction
sheet to become familiar with this product before you begin using it.
Technical Specifications:
Designed to allow you to turn the workpiece at any angle for straight, curved, and
irregular cuts. Will cut mild steel, aluminum, stainless steel or lighter material.
-18” handle for good leverage
-Blades: Alloy tool steel, 4” length
-Dimensions: 8-1/4” x 13-1/2” x 27-1/4”
-Base Size: 5-1/8” x 3-7/8” with three mounting holes (3/8” diameter)
-Tool Weight: 16.4 lbs.
