centor ARES Basic III Guard Tour Verification System, Руководство пользователя

Страница: 7 / 47

7
M8000-RB Recorder:
It is a portable electronic device designed to "read" and store iButton serial numbers, along with the precise time and date of the
readout. The unit is capable of downloading the stored recordings (5460, 64K) into any IBM or compatible PC, Pentium (100
MHz.) or higher processor. It is a sturdy device capable of withstanding harsh environments and impacts. The unit is powered
by a 3 AAA batteries. The reader has a luminous indicator called LED (light emitting diode) and a Buzzer.
To install battery: Open the top of your reader by removing the 2 security screws with the casing key and connect 3 AAA bat-
teries, preferably alkaline. If the batteries are in good shape the LED will emit 5 green blinks with 5 beeps.
To make recordings: To make recordings of Tour Checkpoints, ID Keys, Incident Booklets, (any iButtons) you need only to
touch them with the reader’s probe. If a correct recording is effected the reader will emit
2 green blinks with 2 (two) beeps.
Low battery: The M8000-RB recorder will signal a low battery status by emitting 1 red blink with 2 (two) beeps. A brand new
set of batteries will last for one year or 500,000 recordings.
Full Memory: When the me
mory of your reader reaches “full” status (5460 recordings), each time you attempt a recording, the
reader will emit 1 red blink with 4 beeps ; this means your recorder is not reading anymore. For this case please make a full
download of data to your PC and then erase the memory to reset; now your reader will be ready for the next load cycle of 5460
new recordings.
M8000-RB Setup:
1. Connect your Download Cradle to your PC, to the RS232 or USB port.
2. If are going to use a USB port, install its driver (CD supplied within box).
3. Run the Ares Basic III Program.
Time & Date Setup:
1. Connect your recorder M8000-RB to the P8000 download cradle (See image 1).
2. Click on the
“Recordings”
tab (See image 4).
3. Press the
“Recorder”
button.
4. Press the
“Setup Clock”
button.
5. Your M8000-RB Time & Date will be synchronized
with your PC’s Time & Date. Note: Make sure your PC’s Time & Date are
correct.