34
VeriFast
TM
LVDT – User Manual – FDP-VFA-LVD-UM-EL-1.15-0918
Step 5
If the LVDT Cable Assembly and Pin Lock are
in good shape as shown in the previous step,
they can be disassembled from the used Weld
Pin and reused with a new Weld Pin. To start
this procedure, install the used Weld Pin upside
down in a vise and continue with Step 6 below.
Otherwise:
If the Weld Pin and LVDT Cable
Assembly are being replaced as a whole
assembly, skip directly to Step 13 on page 36.
Step 6
Position the Spanner Tool (provided with your
equipment) on top of the Pin Lock and fit its
pegs into the holes of the Pin Lock [1].
Unthread the Pin Lock from the bottom of the
old Weld Pin [2]).
Remove the LVDT Cable Assembly and Pin
Lock, and set them aside for future use.
Discard the used Weld Pin.
Step 7
Place the new Weld Pin upside down into the
vise (a soft jaw vise is recommended).
Step 8
Apply Loctite 243 to the threads of the new
Weld Pin.
Spanner Tool
(with slot)
Pegs
2
1
Pin Lock
Pin Lock
Weld Pin
LVDT Cable
LVDT Cable
