CN0170 HARDWARE MANUAL
The CN0165 drive has
an automatic Standby
output that requires no
external resistor for
Standby current. A
trimpot located on the
rear face of the drive sets
the standby current as a
percentage of normal
operating current.
As with the CN0162, the
user has the option of
employing the standby
feature of the drive, the
CN0170 Motion
Controller, or both.
Figure 9, Free-wheel Current Standby - CN0165
Figure
9
shows the CN0170's STANDBY used for the "free-wheel" option.
This is equivalent to the CN0162 configuration shown in the lower right
example in Figure 8. The Standby trimpot on the CN0165 sets current
standby. Refer to the Operating Manual, CN0165 Step Motor Drive to
determine motor current settings and values for the R1 current set
resistor.
The Centent CN0182
Servo Drive is
compatible with the
CN0170 controller.
STEP, DIR and 5VDC
are the only connections
required between the
CN0170 and the
CN0182.
The Current Limit
Trimpot on the CN0182
adjusts current set for
the drive.
Figure 10, CN0182 connections
8
Содержание CN0170
Страница 2: ......
