30
The image and sound are
distorted
1. Contrast, sharpness and
color are set incorrectly
2. The color rendering
system is set incorrectly
3. The sound system is not
set correctly
1. Adjust the contrast,
sharpness and color
values
2. Install a color
rendering system
according to the
broadcasting standards in
the country
3. Install a sound
system according to the
broadcasting standards in
the country
The picture is spotted
or with snow
The signal source is
weak or the cable is of
bad quality
Use a good quality
cable
There is no image, no
sound and the indicator
is green/blue
The volume is at the
minimum value or the
TV is in mute mode
Adjust the volume
level
The cable through
which the signal
is transmitted is
connected incorrectly
Connect the signal
cable correctly
Blue screen, AV
inscription
There is no input
signal or the video
cable is not connected
or connected
incorrectly
Connect the video
cable correctly
The image is fuzzy or
flinches or with black
horizontal stripes (in
PC mode)
The PC image is
adjusted incorrectly
enter the "Screen"
menu, select
auto-tune to perform
automatic calibration
and adjust the phase
PC Image is not
entered
No sound
There is no incoming
audio signal or
the audio cable is
incorrectly connected
Connect the audio
cable correctly
PC picture with wrong
color
The color gamut is
incorrectly adjusted
by the user
Adjust the color
settings or reset
the color settings to
factory settings
The HDMI source shows
with snow and pixels
The signal source is
non-standard
Reconnect the HDMI
cable
The remote control
does not work
Batteries are
incorrectly installed
or their service life
has expired
1. Make sure that the
positive and negative
poles are correctly
oriented.
2. Check if there is
contact between
the battery and the
spring
3. Replace the
batteries
6. CARE
-
Thorough and regular cleaning can prolong the life of your new TV and save
you from possible malfunctions. Be sure to turn off the power and disconnect
the power cord before starting any cleaning. Clean the appliance only with
a dry cloth.
7. SPECIFICATIONS
-
Screen size: 43’’ (109 сm), FULL HD
-
Resolution: 1920×1080
-
Aspect ratio: 16:9
-
Contrast ratio: 5000:1
-
Refresh rate: 60 Hz
-
Voltage: 220-240 V ~50/60 Hz
-
Power consumption: 65 W
-
Power consumpsion in standby mode: 0.5 W
-
Power consumption in off mode: 0 W
-
Audio Output 8 W + 8 W
-
Angle of view (L/R): 170⁰/170⁰
-
ATV Color Systems: PAL/SECAM
-
TV Signal: DVB
-
T/T2/C
-
Inputs and outputs: 3xHDMI, 1xRF, CI, 1xAV, 1xCoaxial
-
TV (RF): Unbalanced 75 ohms
-
Additional options: sleep mode, program list, teletext
8. DISPOSAL
Upon expiry of its service life the appliance can be disposed of separately from
ordinary domestic waste. You can turn it over to a specialized electric and
electronic appliance disposal and recycling centre.
9. CERTIFICATION DATA, GUARANTEE
ТThe service life of this item is 10 years since the date of sale to the end user,
provided the item will be used in strict accordance with the present manual and
the applicable technical standards. Upon expiry of the service life please contact
the nearest authorized service centre for suggestions as to further operation
of the appliance. The manufacturing date of the appliance is integrated into the
serial number (digits 2 and 3 - year, digits 4 and 5 - month of manufacture). If any
questions related to appliance maintenance should arise, or if the appliance has
malfunctions, apply to the CENTEK TM Authorized Service Center. The address of
the service center can be found on the website
https://centek.ru/servis.
Service
support contacts: Phone: +7 (988) 24-00-178, Instagram: @centek_official; VK:
vk.com/centek_krd. General Service Center: OOO «Larina-Servis», Krasnodar,
Phone: +7 (861) 991-05-42.
The product has the Certificate of Conformity
No ЕАЭС RU C
-
CN.АБ53.В.03002/21 of 27.12.2021.
10. INFORMATION ABOUT THE MANUFACTURER, IMPORTER
OOO «Larina-Elektroniks».
Address:
Russia, 350080, Krasnodar, ul. Demusa, 14.
Phone: +7 (861) 2-600-900.
DEAR CONSUMER!
The guarantee period for all appliances amounts to 36 months from the date of
sale to the end consumer. With this Warranty Card the Manufacturer confirms
the proper condition of the appliance and undertakes to repair, free of charge,
all defects caused by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS
1. The guarantee shall be valid if the following documentation conditions are
observed:
• The original Warranty Card shall be filled out correctly and clearly, indicating the
of appliance model, serial number and sale date, the stamp of the seller company
and signature of its representative shall be available, as well as the stamps on
each coupon and the buyer’s signature in the Warranty Card.
The Manufacturer reserves the right to reject guarantee maintenance if the buyer
fails to provide the abovementioned documents or if the information contained
therein is incomplete, illegible or ambiguous.
2. The guarantee shall be valid if the following operation conditions are observed:
• the appliance is used in strict accordance with the present manual;
• the safety rules and requirements are observed.
3. The guarantee does not apply to regular maintenance, cleaning, installation
and setup of the appliance at the owner’s location.
4. The guarantee does not apply in the following cases:
• mechanical damage;
• normal wear of the appliance;
• non-observance of operation requirements or erroneous actions on the part
of the user;
• improper installation or transportation;
• natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond
the Manufacturer’s or Seller’s control;
• ingress of foreign objects, liquids or insects into the inside of the appliance;
