SKU 90939
Page 4
Unpacking
When unpacking, make sure the following parts are included: Digital Clamp
Multimeter, black and red Test Leads, hand strap, and carrying case. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual. If any part of the machine is missing or broken, please call Harbor Freight
Tools at the number on the front cover as soon as possible.
a qualified technician. Do not use the tool if any switch does not operate
properly.
15.
Replacement parts and accessories. When servicing, use only
identical replacement parts. Use of any other parts will void the
warranty. Only use accessories intended for use with this tool.
Approved accessories are available from Harbor Freight Tools.
16.
Do not operate tool if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment
or reflexes are impaired while taking drugs. If there is any doubt, do
not operate the tool.
17.
We recommend that only a licensed electrician work on high-
voltage or other potentially dangerous circuits.
Note: Performance of this tool may vary depending on condition of internal
battery.
Warning:
The warnings, cautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be
understood by the operator that common sense and
caution are factors which cannot be built into this
product, but must be supplied by the operator.
Warning:
This product contains or produces chemicals,
including lead, known to the State of California to
cause cancer and bir th defects (or other
reproductive harm).
(California Health & Safety Code 25249.5 et seq.)
Operation
WARNING:
ELECTRICAL SHOCK CAN CAUSE DEATH OR
INJURY. AVOID TOUCHING EXPOSED CONDUCTORS
OF ELECTRICITY.
Additional Multimeter Precautions
1.
Do not test voltage on circuits higher than 600 volts.
