manualshive.com logo in svg

CEN-TECH 40963, Руководство по установке и эксплуатации, Страница: 11 / 16

Поделиться
Скачать
CEN-TECH 40963 Скачать руководство пользователя страница 11

Page 11

For technical questions, please call 1-800-444-3353.

SKU 40963 

        

Small engine Timing

The Timing Light can be used to test 

1. 

the timing on any combustion engine 

that utilizes an impulse or magneto 

ignition, such as motorcycles, lawn 

mowers, or outboard motors.  If the 

product does not have a 12 V battery 

then use an external battery.
Connect a ground from the external 

2. 

battery’s Negative Post to the engine.  
Connect the red clip of the Timing 

3. 

light to the Positive Terminal of the 

Battery and the black clip to the 

Negative Terminal of the Battery.  

Connect the Spark Plug Clamp of the 

Timing Light to the spark plug wire 

with the arrow pointing towards the 

spark plug.  

rotary engine Timing

1.  Connect the red and black power 

leads to the battery.  Connect the 

Spark Plug Clamp to the wire for the 

leading spark plug on the front rotor 

housing.
Start engine and run it at idle speed.

2. 

3.  Aim the Timing Light at the timing 

indicator pin of the front cover.
Loosen the distributor locking nuts 

4. 

and rotate the leading side distributor 

body until the timing mark on the 

eccentric shaft pulley is in line with 

the timing indicator pin.
Tighten locking nuts and recheck 

5. 

timing.
Repeat this process to set the trailing 

6. 

side distributor timing.

Содержание 40963

















Отзывы:

Нет отзывов