CEMO SW200, Руководство по эксплуатации

Страница: 21 / 40

GB
8.5.2 Deactivating wheel shutoff/ spreading
Pull the knurled control knob, turn to the central
position and release (in this position, the long hole
and the pin form an axle).
Figure 8.5.2: Deactivating wheel shutoff
Note:
A “clicking” noise can be heard during cornering and
reversing with the wheel shutoff deactivated.
i
Important!
To move the spreader with spreading, both
wheel shutoffs (left and right) must always
be deactivated.
8.4 Spreading range limiter (optional)
The spreading range is generally directly depend-
ent upon the speed.
The spreading range can be limited with the
optionally available spreading range limiter.
The setting is made via spring split pin L, which is
inserted into the various split pin holes.
For a small spreading radius, the upper split pin
holes must be used, and for a large spreading
radius, the lower split pin holes.
Figure 8.4: Spreading range limiter
8.5 Wheel shutoff
Both wheels of the spreader are equipped with a
wheel shutoff that can be activated or deactivated.
» The wheel shutoff must be activated for transport.
» The wheel shutoff must be deactivated
for spreading .
8.5.1 Activating wheel shutoff/ NO spreading
Pull the knurled control knob, turn all the way to the
left or right and release.
Figure 8.5.1: Activating wheel shutoff
i
Important!
To move the spreader without spreading,
both wheel shutoffs (left and right) must
always be activated.
L
21