9
1.7
Connecting the Device
The standard available interfaces and connectors are shown in Figure 3.
1.7.1
Connecting to the Power Supply
The printer is equipped with a wide area power unit. The device can be operated with a supply voltage of
230 V~/50 Hz or 115 V~/60 Hz without adjustment.
1. Check that the device is switched off.
2. Plug the power cable into the power connection socket (21).
3. Plug the power cable into a grounded socket.
1.7.2
Connecting to a Computer or Computer Network
!
Attention!
Inadequate or no grounding can cause malfunctions during operations.
Ensure that all computers and cables connected to the label printer are grounded.
Connect the label printer to a computer or network by a suitable cable.
For details of the con
fi
guration of the individual interfaces
Con
fi
guration Manual.
1.8
Switching on the Device
When all connections have been made:
Switch the printer on at the power switch (20).
The printer performs a system test, and then shows the
system status
Ready
in the display.
Installation
2
20
21
