18
!
Attention!
Printhead damage caused by improper handling!
Do not touch the underside of the printhead with the
fi
ngers or sharp objects.
Ensure that the labels are clean.
Ensure that the label surfaces are smooth. Rough labels act like emery paper and reduce the service life
of the printhead.
Print with the lowest possible printhead temperature.
The printer is ready for operation when all connections have been made and labels and, if applicable, the transfer
ribbon have been loaded.
1.14
Synchronization of the Paper Feed
After the label stock has been inserted, for peel-off or cutting mode a synchronization of the paper feed is required.
That way the
fi
rst label, which is detected by the label sensor, will be transported to the print position and all labels in
front will be fed out of the printer. So the synchronization avoids, that blank labels are peeled-off together with the
fi
rst
printed label or that the
fi
rst cut label would be too long. Both effects can cause useless
fi
rst labels.
Select
to start the synchronization.
Remove the blank labels peeled-off or cut during the synchronization.
i
Notice!
Synchronization is not necessary if the printhead was not opened between different print jobs, even if the
printer was switched off.
1.15
Tear-off Mode
In tear-off mode, labels or continuous media are printed. After printing, the label strip can be separated by hand.
Printing Operation
5
5.1
5.2
