4
2. INSTRUCTIONS FOR USE
The tool can be held in one hand while positioning the connector with the other.
Residual battery capacity level is automatically displayed after every cycle.
The part reference includes the following:
– Basic tool complete with crimping jaws with thermoplastic protection.
– Spare battery.
– Battery charger.
– Plastic carrying case type
VAL P45.
2.1) Preparation
With the tool in the rest position
(the ram fully retracted)
proceed as follows:
– Select the appropriate groove or die set for the connector to be crimped.
– Insert the dies into the jaws of the tool (see § 2.8).
– Insert the conductor into the connector.
2.2) Die advancement
(Ref. to Fig. 1)
Grip the tool fi rmly and comfortably.
– Position the connector in the die groove
and ensure the correct location of the
crimp.
– Press operating button (4) to activate
the motor-pump group for the advance-
ment of the ram. To halt the advance-
ment, release the operating button and
the motor will cut out.
Make sure the dies are exactly positioned
on the desired crimp point otherwise
re-open dies following instructions as per
§ 2.5 and reposition the connector.
2.3) Compression
Insert the conductor in the connector and press the operating button (4): the ram will gradually
move forward until the two dies touch. It is recommended to keep operating until the maximum
pressure valve is activated and a "click" is heard.
2.4) Head rotation
For ease of operation the tool head can rotate through 180°, allowing the operator to work in the
most comfortable position.
Warning: do not attempt to rotate the head when the hydraulic circuit is pressurised.
2.5) Release of dies
Press the pressure release button (9), the ram will retract and open the jaws.
9
4
FIG. 1
1
Содержание B54MD-D6
Страница 10: ...10 11 4 12 7 2 1 19 16 20 See TABLE 3 ...
Страница 11: ...11 20 10 9 18 15 17 8 14 6 1 2 3 13 5 TABLE 2 ...
