Cembre B54D-D6, Руководство по эксплуатации и обслуживанию

Страница: 4 / 8

3 12
2. INSTRUCTIONS FOR USE
The tool can be held in one hand while positioning the connector with the other.
Residual battery capacity level is automatically displayed after every cycle.
The part reference “B54D-D6” includes the following:
– Basic tool complete with crimping jaws with thermoplastic protection.
– 2 batteries type CB9630H .
– Battery charger type CFC230 complete with CBA96-144 adapter.
– Plastic carrying case type VAL P25.
2.1) Preparation
With the tool in the rest position (the ram fully retracted) proceed as follows:
– Select the appropriate groove or die set for the connector to be crimped.
– Insert the dies into the jaws of the tool (see § 2.8).
– Insert the conductor into the connector.
2.2) Die advancement
(Ref. to Fig. 1)
Grip the tool fi rmly and comfortably.
– Position the connector in the groove
dies and ensure the correct location
of the crimp.
– Press operating button (3) to acti-
vate the motor-pump group for the
advancement of the ram. To halt the
advancement, release the operating
button and the motor will cut out.
Make sure the dies are exactly
positioned on the desired crimp
point otherwise re-open dies fol-
lowing instructions as per § 2.5
and reposition the connector.
2.3) Compression
Insert the conductor in to the connector and press the operating button (3): the ram will
gradually move forward until the two dies touch. It is recommended to keep operating until
the maximum pressure valve is activated and a "click" is heard.
2.4) Head rotation
For ease of operation the tool head can rotate through 180°, allowing the operator to work
in the most comfortable position.
Warning: do not attempt to rotate the head when the hydraulic circuit is pres-
surised.
3
8
FIG. 1
Code N° DESCRIPTION Qty Item
6640205 300 68 D. 4 SCHNORR WASHER 1
6900052 300 69 M4x6 SCREW 1
6000602 300 70 LEVER SPRING 1
6900054 300 71 M4x6 SCREW 1
6360022 300 72 O-RING 1
6360125 300 75 O-RING 1
6641020 300 77 Ø 6 CU WASHER 1
6000318 300 78 SPRING GUIDE 1
6160081 300 310 BODY 1
6000596 300 350 RESERVOIR CAP 1
6000588 300 360 COMPLETE LEVER SUPPORT 1
6000601 300 400 COMPLETE MEMBRANE 1
6900602 300 500 COMPLETE SUCTION SCREW 1
6000620 600 COMPLETE JAW SUPPORT 1
6000621 600 2 SUPPORT 1
6000632 600 3 ROLL 2
6560200 600 4 PIN ROLL 2
6000622 600 5 JAW SUPPORT 1
6000623 600 6 SPRING 1
6040564 600 7 RAM GUIDE RING 1
6000624 600 8 PIN GRIP 1
6000633 600 9 JAW LOCKING PIN 1
6700051 600 12 Ø 10 CIRCLIP 1
6900013 600 13 M3x4 SCREW 1
6520030 600 14 RAM RETURN SPRING 1
6520601 600 15 SPRING 1
6760420 600 16 CYLINDRICAL PIN 1
6900180 600 17 M4x10 SCREW 1
TABLE 3 (ITEM 10 IN TABLE 2)