13
2
BATTERY OPERATED HYDRAULIC CRIMPING TOOL
1. GENERAL CHARACTERISTICS
suitable for installing electrical compression connectors
for conductors up to 150 mm
2
(300 MCM)
54 (6)
340 (4,900)
450 x 119 x 66 (17.7 x 4.7 x 2.6)
2,9 (6.4)
9.6
9.6 / 3.0 Ni-MH
220-240 / 50-60
AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent.
the tool is equipped with a maximum pressure valve.
Application range:
Crimping force
kN (sh ton):
Rated operating pressure bar (psi):
Dimensions LxWxH mm
(inches):
Weight with battery
kg (lbs):
Motor Volt
DC:
Battery type CB9630H
Volt / Ah:
Battery charger supply
Volt / Hz:
Recommended oil:
Safety:
Types of jaw supplied:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
pA
is equal to .............................................................................. 66,8 dB (A)
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
pCPeak
is ......................................................................< 130 dB (C)
– The acoustic power level emitted by the machine
L
WA
is equal to ................................................................................................................ 75 dB (A)
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1).
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1
st
Standards, and under operating conditions much more severe than those normally found,
certify that the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec
2
.
CDD 6 with D3 groove to accept all "W" style crimping
dies + "BG" fi xed groove
24
26
31
19
18
17
75
30
67
16
350
67
64
65
66
310
70
45
63
77
360
71
62
5
4
3
3
12
13
15
16
6
8
17
1 1
10
1 1
600
9
2
1
27
72
69
78
68
*
INTERCHANGEABLE CRIMPING JAWS
JAW TYPE
GROOVES
CRIMPING DIE COMPATIBILITY
CDD6
“D3” TO ACCEPT ALL “W” STYLE
CRIMPING DIES + “BG” FIXED
GROOVE
FCI Burndy
W, X Series
Greenlee
KD6 Series
Ilsco
ND Series
Huskie
HT-58 Series
Panduit
CD-2001 series
