Cembre B1350-C-KV, Руководство по эксплуатации и обслуживанию

Страница: 12 / 48

12
ENGLISH
4.4) ERRORS:
these appear during operation, combined with a beep and fl ashing LED Worklights,
to notify the operator of procedural or operational errors.
Message Error description Solution
ERROR
Ï
Ð
The pressure release button (5) was
pressed before the control parameters
were reached (Force/Pressure). Repeat the work cycle and wait for the motor
to stop automatically.
001
Ï
Ð
Abnormal power consumption of the
motor for more than 3 seconds.
The tool stops. Wait for the display to turn off (60 sec.) or
remove and re-insert the battery, then re-
start the tool.
If the error occurs frequently, contact
Cembre
.
002
Ï
Ð
Output voltage of the pressure trans-
mitter is out of the pre-set range. Repeat the work cycle; if the error
occurs frequently, contact
Cembre
.
003
Ï
Ð
Failure to reach the set pressure within
30 seconds of continuous operation of
the machine. Repeat the work cycle; if the error occurs
frequently, contact
Cembre
.
004
Ï
Ð
Overcharging of the battery with
protection tripping.
The tool stops. Wait for the display to turn off (60 sec.) or
remove and re-insert the battery, then re-
start the tool.
If the error occurs frequently, contact
Cembre
.
Errors are displayed for about 30 seconds before being reset, but will display repeatedly in
the event of permanent anomalies.
5. CONNECTION TO COMPUTER
The memory card integrated in the tool records operating data from 200.000 cycles for transfer via
the USB cable supplied.
To view and manage this data, go to
www.cembre.com and register in the dedicated area, then
download the free
Cembre
software CEM_SWBT01 .
Keeping the Firmware of the tool updated, via free of charge download from here, will optimise
the tool's performance.
___________________________________________________________________________________
Following information applies in member states of the European Union:
USER INFORMATION in accordance with “Directives 2011/65/EU and 2012/19/EU.
The ‘Not in the bin’ symbol above when shown on equipment or packaging means that the equipment
must, at the end of its life, be disposed of separately from other waste.
The separate waste collection of such equipment is organised and managed by the manufacturer.
Users wishing to dispose of such equipment must contact the manufacturer and follow the prescribed
guidelines for its separate collection. Appropriate waste separation, collection, environmentally compat-
ible treatment and disposal is intended to reduce harmful environmental eff ects and promote the reuse
and recycling of materials contained in the equipment. Unlawful disposal of such equipment will be sub-
ject to the application of administrative sanctions provided by current legislation.