1 2
Safety precautions
Safety
DANGER
Engines produce carbon monoxide which
is odorless, causes slower reaction time,
and can lead to serious injury. When the
engine is operating, keep service areas
WELL VENTILATED or attach the vehicle
exhaust system to the shop exhaust
removal system.
Set the parking brake and block the
wheels before testing or repairing the
vehicle. It is especially important to block
the wheels on front-wheel drive vehicles;
the parking brake does not hold the drive
wheels.
Wear an eye shield when testing or
repairing vehicles.
Exceeding the limits of this meter is
dangerous.This will expose you to serious
or possibly fatal injury. Carefully read and
understand
the
cautions
and
the
specification limits of this meter.
Voltage between any terminal and ground
must not exceed 1000V DC or 750V AC.
Use caution when measuring voltage above 25V DC or 25V AC.
Circuit tested must be protected by a 20A fuse or circuit breaker.
Do not use the meter if it has been damaged.
Do not use the test leads if the insulation is damaged or if metal
is exposed.
CAP
Hz
20A
MAX every
For
MAX
FUSED
15 min.
FUSED
20A MAX
30 sec.
400mA
500V
1000VDC
750VAC
MAX
-PERIOD
AmA
μ
DWELL
RPM
ms
¦ ¸
RPM
COM DWELL
ms-PULSE
%duty
V
x10RPM
OFF
2
4
¡ ã
C
CAP ¡ ã
¦ ¸
Hz
20A
A
F
μ
mA
ms
TEMP.
%
CEM
TRIG¡ À
1
