background image

 

12 

DIODE TEST 

WARNING: 

To avoid electric shock, do not test any diode that 

has voltage on it. 

1.   Set the function switch to the 

  position. 

2.  Insert the black test lead plug into the COM socket and the red 

test lead plug into the 

  socket. 

3.  Press the MODE button until “

” appears in the display. 

4.  Touch the test probe tips to the diode or semiconductor junction 

you wish to test. Note the meter reading. 

5.    Reverse the probe polarity by switching probe position. Note 

this reading. 

6.    The diode or junction can be evaluated as follows: 

A. If one reading shows a value and the other reading shows   

OL, the diode is good. 

B. If both readings show OL, the device is open. 
C. If both readings are very small or zero, the device is shorted. 

NOTE:

 The value indicated in the display during the diode check is   

the forward voltage. 

 

CAPACITANCE MEASUREMENT 

WARNING: To avoid electric shock, discharge the capacitor under 

test before measuring. 

Set the function switch to the CAP capacitance position. 

Insert the black test lead banana plug into the negative COM   

jack and the red test lead banana plug into the CAP positive 
jack. 

Содержание DT-5302

















Отзывы: