Control panel on Stove
The control panel is located behind the door of the stove.
A
On/off Isolating Switch
B
Flame Effect Dimmer Switch
C
Low Heat 1000W
D
High Heat 2000W
B
C
D
A
Remote Control
Prior to use the remote control handset requires the insertion of 2 x AAA batteries.
Remove the cover on the rear of the remote handset by sliding backwards. Install the batteries as
shown and then slide the cover back into the original position.
To enable the remote control to function the power to the stove must be switched on.
At a distance of 1.5 meters to 2 meters point the remote control handset directly towards the stove.
A. On/off Switch
B. Flame Effect adjuster - To operate, press one to five times to commence the cycle of 3
different brightness levels and one motion ember bed effect level. Press a fifth time to shut down
the flame&ember bed effect.
C. Low Heat
D. High Heat
