INSTALLATION INSTRUCTIONS
This stove must be installed by a qualified, competent person.
A. Location
1. The stove must have a minimum clearance of 50mm to combustible material on all sides.
A clearance of minimum 50mm to non-combustible materials is also required to ensure correct
operation.
2. This appliance is for indoor installation only and is not designed to be installed outside. The
appliance must be kept away from any source of damp or moist conditions.Avoid any close
contact with water.
3. If there is any doubt regarding the suitability of the installation site contact your supplier.
B.
Electrical Work
THIS PRODUCT MUST BE EARTHED
1. If the mains socket is required to be concealed this can be sited adjacent to the back of the
fireplcce.
2. Should the stove be connected directly into the mains supply a fused switch spur with a 13 amp
fuse must be fitted. It is imperative that the power supply is capable of handing a load of 2000
watts(2kW).
3. If the supply cable is damaged in any manner it MUST be replaced.
4. Do not connect the appliance to an extension lead.
5. The stove must not be modified from the manufactures specification in any way and the
appliance must only be used for the purpose recommended by the manufacturer.
6. If the stove shows any signs of damage it is important that it is examined by a qualified person.
7. Please observe these instructions as failure to do so may result in electric shock or other injury.
8. Check the technical specification.
9. Always ensure that all electrical work complies with the relevant Building Regulations and
the Electrical Code of Practice. All electrical work should be carried out by a qualified
electrician.
10. Do not install a time switch to operate the appliance.
11. If in any doubt contact your supplier or a qualified electrician.
