( LOGO)
DESK AND WALL-MOUNTED ELECTRIC FIREPLACE/HEATER
BFM EUROPE LTD
Page 12
The next segment, (4), H_heat Control , is a high heat button for the heater. Pressing the button once ,the
high heat function is on, and pressing the button twice ,the high heat funciton is off.
When the Main Power button is on, pressing and holding this H_heat Control button 10 seconds to enter
heating function locked mode, the uplights will flicker 6 times. Then every time you press the button,
there are 6 times flash only the uplights but no heating function in this mode. Anew pressing and
holding this H_heat Control button 10 seconds, this mode will be unlocked after 6 times flash.
When you press the L_heat button or the H_heat button, The uplights will flash one time to indicate heat function
is on or off.
The last segment, (5), is the Sidelights Control button. Like the Flames Control button,Pressing the button
once ,the sidelights display ember,and pressing the button twice,it will show you the blue sidelights .You can
control the sidelights color as the following:
BUTTON PRESS
Sidelights Color
1
st
press
Ember
2
nd
press
Blue
3
rd
press
white
4
th
press
Automatically Display
5
th
press
OFF
The automatically mode will show you: the ember sidelights is on and running 10 seconds, then off; then the blue
sidelights is on and running 10 seconds, then off; then the white sidelights are on and running 10 seconds, then
off; and then the ember sidelights is on and running 10 seconds, then off…. This mode will be circulating running.
NOTE: If this product experiences exceptionally high temperature, it may automatically stop heating. If
this occurs the product should be unplugged or isolated from the main supply for a period of 30 seconds
before the power is then re-supplied.
The Fireplace/Heater Remote Control
A great feature of the BFM Fireplace/Heater unit is the small remote control. This remote combines all the
functions of the front panel controls of the fireplace/heater with the convenience of not having to leave the
comfort of your seat to change the settings of the fireplace/heater.
The first thing to do with the remote control is to install the battery. The battery is supplied with the remote
control. Replacement batteries can be purchased at any electronics store. The part number for the battery is
CR2032.
1. Turn the remote control over, and locate the battery cover.
2. Remove the battery cover by sliding it towards the bottom end of the remote control.
Battery Cover
OPERATION
OPERATING INSTRUCTIONS