The print server also supports web configuration permitting the users to
configure settings through the web browser. Print Server’s default IP address
as follows:
♦
Default IP address – 192.168.0.1
♦
Subnet Mask – 255.255.255.0
Note:
The PC’s IP address must correspond with the print server’s IP
address in the same segment for the two devices to communicate.
Installing the Print Server
Follow these steps for a trouble-free start of print server operations with your
Wireless USB Print Server. Please take particular notice that the network
connection should be made before supplying power to the print server.
WARNING:
Configuration problems may result if the print server is powered
up without first establishing its network connection. Please follow this
procedure to avoid complications at the configuration stage.
1.
Confirm proper operation of each of the printers to be connected to the
print server.
2.
When you have confirmed proper operation of the printer, switch its
power off.
3.
Confirm that your network is operating normally.
4.
Connect the print server to the network through the RJ-45 connector of
the print server.
5.
While the printer is powered off, connect the print server through the
cable to the printer’s USB port.
6.
Turn on the printer’s power.
