Back Panel
Component Description
DC Power
Input
The DC power input connector is located on
the Print Server’s rear panel and is labeled DC
5V. Please note that the power supply
included in the package is correct for this
Wireless USB Print Server; substitution of
other equipment may void warranty.
Reset Button
1.) Press and release this button to reset the
print server.
2.) Press and hold this button for three seconds
(the USB LED on the front panel lights up)
and then release it, the print server will
resume the factory default settings.
USB Port
The USB port allows you connecting the print
server to a printer with USB connector.
Antenna
To accept/transmit the data from/to your
wireless network.
LAN
Connector
This LAN connector (RJ-45) provides the
printer server with connection to the network
through 10/100 TX Ethernet cabling.
