Cellphone-Mate Inc.
CM2100 62dB Manual
2
CONTENTS OF THE PACKAGE
fdgbsddg
1.
CM2100 AWS Amplifier with connectors: N female type
2.
Mounting Kit
3.
110V AC Power Adaptor
4.
User Manual (this document)
The following items need to be purchased separately before installation:
1.
Dome antenna or other type of indoor antenna.
2.
Yagi antenna or omni directional antenna for outdoor use.
3.
CM400 cable that connects indoor antenna with the amplifier, length depends on actual situation.
4.
CM400 cable that connects outdoor antenna with the amplifier.
For further help,
please consult the Cellphone-Mate website (
) or call toll free at 888-365-MATE.
SAFETY NOTES
fdgbsddg
The human body should always be separated from the indoor antenna of the Amplifier by at least 10 inches (25cm).
Don't expose this product to extreme high or low temperatures. For example, putting the Amplifier under direct sunlight for too long may
cause it to overheat and damage the electronic components inside.
There are no consumer serviceable or modifiable parts inside
this Amplifier product. Alteration or abuse of the Amplifier or other components will void this product’s warranty, and could be
dangerous to the user.
INSTALLATION INSTRUCTIONS
gbsddg
Warning: Never power on the units before completion of the installation.
The signal is received by the outside antenna from the cell tower, then AMPLIFIED and transmitted to your phone through the inside
antenna. When the phone transmits, the signal is received by the inside antenna, then AMPLIFIED and transmitted to the cell tower
through the outside antenna.
You can always refer to the picture on the next page which is there to help you through each step of the installation.
STEP 1. Check to make sure the Power Switch on the amplifier is turned off.
STEP 2. Install the CM2100 62dB amplifier on the wall with the mounting kits supplied.
STEP 3.
Connect the Inside Antenna to the side that shows “Indoor Ant.” using CM400 cable.
STEP 4. Connect the Outside Antenna:
Select an outside mounting location. For best performance, try to keep the antenna on top of
the roof. The outside antenna should be located in an area with at least a 12” radius clear of obstructions, and other radiating elements.
Use CM400 cable to connect to the amplifier.
