Cello 502099676, Инструкция по эксплуатации

Страница: 4 / 43

The acceptable fuels of this grill/smoker are:
• Hardwood charcoal
• Briquettes
We recommend that you use briquettes, the burning
time of which is much longer than that of hardwood
charcoal. They do not need to be added to the grill/
smoker as often as hardwood charcoal. Take that in
account in particular in the case of long-term
smoking. Some of the briquettes smoke even up to
240 minutes.
Note!Do not use billets or other timbers as fuel. Their
calorific value is too high and too much heat can
damage the grill/smoker.
The damage caused by the use of billets or other
timber are not covered by the warranty.
Different ignition methods
The grill/smoker can be ignited by different methods.
• By using a firestarter.
• By using paraffin-based lighting bits.
• By using lighter fluids. Use lighter fluids based on
rapeseed oil, which does not leave side flavoursto the
products to be smoked. It can be used to ignite
hardwood charcoal.
• Using an electric lighter. It can be used to ignite
hardwood charcoal and briquettes.
WARNING: Do not use petrol or spirits for ignition or
for theincrease of the flames. Use only the ignition
means according to standard 1860-3.
All kindling materials and tools are sold separately.
Ignition
When the grill/smoker is ready, it can be ignited as
follows.
Ignition of hardwood charcoal with a
firestarter:
1. Put at the bottom of the fire starter a couple of
crumpled newspapers or some paraffin based
lighter bits on the charcoal grate.
2. Fill the top part of the fire starter with hardwood
charcoal.
3. Put the fire starter in the center of the charcoal
grate.
4. Light the newspaper or the lighter bits with a
match or a lighter.
5. When all the hardwood charcoal is glowing red,
pour the contents of the fire starteronto the charcoal
grate.
Ignition of briquettes with a fire starter:
1. Put 3-5 paraffin based lighter bits on the
charcoal grate.
2. Fill the top part of the fire starterwith briquettes.
3. Put the fire starterin the center of the charcoal
grate.
4. Light the lighter bits with a match or a lighter.
5. When all the briquettes are glowing red, pour the
contents of the fire starter to the charcoal grate.
Ignition with lighter bits:
1. Make a pyramid shaped pile of hardwood
charcoal or briquettes on the charcoal grate.
2. Put 3-5 paraffin based lighter bits among the
hardwood charcoal or briquettes.
3. Light the lighter bits with a match or a lighter.
Ignition with lighter fluid:
1. Make a pyramid-shaped pile of the hardwood
charcoal on the charcoal grate.
2. Dampen the charcoal with lighter fluid. We
recommend to use lighter fluids based on rapeseed
oil. It does not leave side flavoursto the products
being smoked.
3. Rapeseed based lighter fluid can be ignited
directly with a match or a lighter.
4. If you use any other lighter fluid, let it be
absorbed in the hardwood charcoal before ignition.
For absorption time, look at the lighter fluid
packaging.
4