Cellink BIO X, Руководство пользователя

Страница: 46 / 60

42
07 Relevant G-code commands
Commands Description
G1 Xnnn Ynnn Ennn Fnnn G1 is the absolute move command. The values for the X and Y parameters
are the coordinates (in mm) directing where to move. E tells the BIO X to
open the valve for extrusion. F is the movement speed of the printhead in
mm/min.
G1 Znnn Ennn Fnnn G1 is the absolute move command. The value for the Z parameter is the
coordinate (in mm) directing where to move. E tells the BIO X to open the
valve for extrusion. F is the speed of the printhead in mm/min.
G4 Snnn Pnnn The G4 command tells the system to dwell. S is the wait time in seconds
and P is the wait time in milliseconds.
G7 Xnnn Ynnn Ennn Fnnn G7 is the relative move command. The values for the X and Y parameters
are the coordinates (in mm) directing where to move relative to the current
position. E tells the BIO X to open the valve for extrusion. F is the speed of
the printhead in mm/min.
G7 Znnn Ennn Fnnn G7 is the relative move command. The value for the Z parameter is the
coordinate (in mm) directing where to move relative to the current position.
E tells the BIO X to open the valve for extrusion. F is the speed of the
printhead in mm/min.