Cellini CMF75, Инструкция по эксплуатации

Страница: 3 / 10

PRODUCT INTRODUCTION
Misting Fan is design with digital control system. It
has device for storing water. It can lower surrounding
temperature, freshen the air with equipped ion humidify
the air through the principle of water evaporation. LED
panel makes it luxurious and easy to use.
IMPORTANT NOTES
Please read the instruction manual carefully before
operating this unit.
1. Make sure that the home power supply consistent
with the product before plug in.
2. Switch off and disconnect from the power outlet
when not in use or before cleaning.
3. Do not expose the unit to rain and keep out of reach
of water on the control panel or LED for proper use.
4. Do not put the fingers or any objects inside the fan
grill during operation.
5. Do not operate the unit if there is any damage to
the power plug or cord - take unit to our after sales
service center for repair, do not attempt to undertake
any required repairs yourself.
6. Wipe clean with damp cloth only - do not use any
abrasive cleaners.
7. This appliance is not intended for use by persons
(including children) with reduced physical, sensory,
or mental capabilities or lack of experience and
knowledge unless then have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
8. Do not use the misting function if unit is to be used
in a damp space.
9. Do not use the misting mode when water tank is
empty; always keep enough water in tank in order
for this function to operate, otherwise may cause
water pump malfunction.
10. If unit is being stored away for a long period of time
without use, empty the water tank before storing or
transporting the unit.
HOW TO ASSEMBLE THE WHEELS
(SEE DRAWING 1)
1. Attach the four wheels into the unit.
2. Two of the wheels can be locked in position if
required.
DRAWING 1
DRAWING 2
MISTING FAN OPERATION - REMOTE & CONTROL PANEL
Make sure that the home power supply is consistent
with the product before plug in.
POWER ON/OFF OPERATION
Press the "fan power ON/OFF button"(Feature No. 20)
on the control panel or (Feature No.30) on the remote
controller to start operation, LED light (Feature No.21)
will become illuminated on the control panel. Press
the same button to turn off the function.
FAN SPEED OPERATION
Select the required fan speed to Low/Medium/High
by press the "Fan Speed Button"(Feature No.19) on
the control panel or (Feature No. 28) on the remote
control. LED light above selected speed will become
illuminated on the control panel.
MISTING OPERATION
1. Ensure the unit is placed on a level surface and
unplug from the power and switch off all the function
when refilling water.
2. Remove the water tank (Feature No.25) and fill water,
but do not fill water over the Marking Line (see
drawing 2 below) to ensure water does not overflow.
1. Remove the
water tank and
fill clean water.
2. Tighten the cover
in clockwise
direction.
4. Put the water tank
back to the unit.
3. Turn the water tank upside down
to make sure no leakage.
3. Misting function will not operate effectively if water
not enough.
Marking
Line