Cellient MHN200, Руководство пользователя

Страница: 21 / 23

21
8. Troubleshooting
8.1 I forgot Login ID and Password / I forgot IP address after changing IP address
Use your mobile hot-spot after restoring the configuration into factory-default value.
How to restore the configuration?
•
Press “reset” button for more than 2 seconds and release in normal status.
•
User can see Power Button LED is blinking.
•
After about 15 seconds, mobile hot-spot is automatically turned off.
•
When re-powered on, you can see the configuration is changed to the factory-default value on Web-UI.
Caution: Please make sure mobile hot-spot has enough battery level when factory resetting is performed.
8.2 I cannot connect to the Internet
User should check the displayed icons and messages.
If
Received Signal Strength Indicator
icon ( ) is not displayed, please refer to below Section 8.2.1.
Check whether Wi-Fi icon ( ) is displayed.
8.2.1 Check Wi-Fi
Check if the Wi-Fi icon
( )
is displayed.
If the Wi-Fi icon is on, connect to the mobile hot-spot by correct SSID. SSID value is different for each mobile
hot-spot to avoid interference. So, each mobile hot-spot has a unique SSID such as “Net1 M-90 1234”.
If Wi-Fi is connected, ping to mobile hot-spot’s LAN IP address (default: 192.168.0.1).
If ping is not OK, check if SSID is correct, and if Wi-Fi security is configured.
If ping is OK, refer to below Section 8.2.2.
8.2.2 Check CDMA
Check whether the Received Signal Strength Indicator icon
( )
is displayed.
If Received Signal Strength Indicator icon is not displayed, check if the retractable antennas are fully pulled
out or check the status of PPP.
If WWAN (data call) connection status icon ( ) is displayed, PPP connection is established. If not, please
check other configurations on the Web-UI or network configuration of your client device.