7
Changing Read-only, Read-write Functionality
The Cellebrite Forensic Memory Card Reader can work either in read-
only (“write-block” mode) or as a read-write device. This function is
set by a switch on the side of the reader.
NOTE: To change functionality, disconnect the device from the
computer. Changing the switch while the reader is connected to the
computer will not change its functionality.
NOTE: the USB hub is not influenced by the “write-block” switch.
When the card is in “read-only” mode the front red LED will glow.
The green LED device access light will glow when the system is
communicating with the media.
Offering
The Forensic Memory Card Reader is provided as part of the UFED
ruggedized system. It can also be purchased separately via the
Cellebrite online shop.
Technical Support
For technical inquiries, go to:
http://www.cellebrite.com/mobile-forensics-products/ufed-support-
center.html
