CellarPro 3000Scm, Руководство пользователя

Страница: 15 / 53

15
V3.3.16
Condensate Pump Operation Test
When the system is ready to start up, test the condensate pump before installing the
evaporator cover by powering up the system and submerging the pump in a tray filled
with water to verify the pump operates and discharges water to the final drain.
The condensate pump is self-priming. The pump activates when the water level in
the evaporator cover reaches a depth of 5/8”, and shuts off when the water level
reaches 3/16”. The pump will activate an overflow alarm at a level of 1”, indicated by
“CA” on the temperature controller display. The refrigeration is disabled while this
alarm condition persists, but the pump will continue to run until the alarm is cleared.
Over time, the pump sensor may become contaminated by particles in the
condensate water causing the pump to run constantly. If this occurs, flush the sensor
with clean water through the pump sensor housing vents.