Page 14 | 1-800-343-9463
CWSK.WM/FD5000
082015
Disconnect the white jumper wire from the #7 terminal
on the terminal block and secure the #4 wire into the #7
terminal on the terminal block.
Secure the white wire from the #3 terminal on the
terminal block inside of the N lever connector.
Remove the blue disconnect from the #1 terminal
on the Delay on Break Timer.
Crimp the blue disconnect labeled #1 onto the
loose wire coming from the Johnson control. (It was
disconnected from the terminal block in step 17)
39
40
41
42
1
