4. Once set, press the programmed button again to save the binding. You may
then program another button.
5. Once every switch is set, press and hold
SIREN
and
RADIO
for 3 second to exit
PROGRAMMING MODE.
VOL-
and
VOL+
will stop blinking to indicate that you have
exited from PROGRAMMING MODE.
Button Mapping:
The switches
SW1
,
SW2
and
SW3
may be mapped with other buttons to grouped
according to your usage and application needs.
1. Press and hold
SIREN
and
RADIO
for 3 second to enter PROGRAMMING MODE.
VOL-
and
VOL+
will blink to indicate that you are in PROGRAMMING MODE.
2. While in PROGRAMMING MODE, press the desired button to program (i.e.
SW1
,
SW2
or
SW3
).
3. While the programing switch blinks, press the desired button(s) that you would like to
map with this switch. The possible button combinations are as followed:
Setting
Mapping
with
SW1
SW1
SW2
SW3
LIGHT (SW4)
SIREN
O
O
O
O
O
O
O
O
O
X
X
X
SW2
SW3
SAF101H Siren_v.1.0
SAF101H Siren_v.1.0
- 9 -