Celexon PL400 HC plus, Руководство по установке

Страница: 4 / 9

Once the lift has been installed, position the projector
under the 3 mounting brackets and attach with the hex
screws (M) as shown in fig 3.
PLEASE NOTE: Please ensure that the load
centre of the projector is in the middle of the lift.
The mounting bra-ckets can be moved easily.
Pull the power cable and data cables for the projector
from the ceiling (ca 45cm) down. Group and feed the
cables into the plastic spiral provided. Fix the spiral to
the upper part of the aluminium profile using the wire
clamp provided (fig 4). Ensure that the cables are
aligned to the back of the projector.
PLEASE NOTE: Please ensure that the plastic
spiral does not impair the movement of the lift.
Once the lift has been installed, connect to the switcher,
see fig 5 or to an alternative means of control.
PLEASE NOTE: Please ensure to execute the
following steps without the power on to ensure
danger of an elec-trical shock is avoided. If unsure,
have the lift installed by qualified personnel.
fig. 3
fig. 4
Blu Marrone Nero Giallo/verde
Blue Brown Black Green/Yellow
Blue Marron Noir Vert/Jaune
Blau Braun Schwarz Grun/Gelb
Azul Marron Negro Verde/Amarillo
L 21281
N
F
K
fig. 5
The next step is to set the upper ‘stop position’ (closed lift) and the lower
‘stop posi-tion’ (open lift).
If the projector is positioned inside a false ceiling, ensure that the upper stop posi-tion
is set so that when the lift is closed, the brackets do not touch the ceiling and that the
ceiling panel is level with the rest of the ceiling. The lower ‘stop position’ has to be
adjusted so that the image is correctly projected onto the screen.
To set the upper ‘stop position’:
WARNING: Do NOT try to increase the upper ‘stop position’ as this
may cause damage to the lift. This will invalidate the warranty. If the lift
is used inside a false ceiling, the upper ‘stop position’ MUST be set
before the ceiling panels are mounted onto the lift.
3