2 | ENGLISH
To install the StarSense phone dock, insert the
bayonet mount on the side of the dock into the
port on the side of the mount opposite the dovetail
clamp.
Slide the finderscope bracket into the dovetail slot
on the telescope tube near the focuser. The large
window on the finder should be facing the front
of the telescope. Secure the bracket by tightening
the setscrew on the dovetail slot.
Line up the arrow on the dock with the alignment
mark on the mount and press inward while turning
the dock counterclockwise until the orange release
button snaps into place in the hole on the dock.
To remove the dock, press the orange release button
and turn the dock clockwise until the bayonet mount
releases.
Remove the lens cap from the front of the
telescope. To observe, look through the eyepiece
as shown above. Focus the image by turning the
knobs below the focuser.
There is a small clear plastic tab inserted between the
battery and the contact. This was included to prevent
the battery from discharging during shipment. Pull
this out to allow your battery to work.
Downloading and
Activating the App
Before you take your telescope outside, download
the StarSense Explorer app to your mobile device.
Search for “Celestron StarSense Explorer” in the
Apple App Store or Google Play. The app is large,
so we recommend downloading it while connected
to Wi-Fi.
Once you have downloaded the app, locate the
orange postcard in your telescope box. Launch the
app. When prompted, enter the activation code on
the postcard to activate the app. Your code will
unlock up to 5 devices.
14
1 6
13
12
11
1 5
1
