Celestron Celestar 8 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 81

background image

Celestar Manual

Assembling your Celestar

15

ATTACHING THE FINDER TO THE BRACKET

With the bracket firmly attached to the telescope, you are ready to attach the finder to the bracket.

1.

Thread the three nylon thumbscrews into the finder bracket. Tighten the screws until the heads are
flush with the inner diameter of the bracket ring. Do not thread them in completely or they will
interfere with the placement of the finder.

2.

Slide the rubber O-ring onto the back (i.e., eyepiece end) of the finder. It may need to be stretched a
little.

3.

Position the O-ring on the main body of the finder so that it is toward the front (i.e., objective) end of
the finder.

4.

Slide the end of the finder where the eyepiece mounts into the front of the bracket. Push it back until
the end of the finder, where the eyepiece attaches, is past the back ring of the bracket , but NOT so far
that the O-Ring is snug inside the back ring.

5.

Slide the O-Ring toward the back(i.e., eyepiece end) of the finder.

6.

Push the finder back until the O-Ring is snug inside the back ring of the finder bracket.

7.

Hand tighten the three nylon-tipped thumbscrews until snug.

To properly align the finder, please see the section on “Aligning the Finder.”

Figure 2-7

REMOVING THE LENS CAP

The Celestar lens cap utilizes a bayonet-type locking mechanism to hold it in place. To remove the lens
cap, hold the cover firmly and rotate the outer edge 1/2" counterclockwise and pull off.

«
...
13
14
15
16
17
...
»

Содержание Celestar 8


















































































Отзывы:

Нет отзывов

Похожие инструкции для Celestar 8

Бренд: Celestron Страницы: 60

Бренд: SVBONY Страницы: 8

Galaxy Tracker 375 32015

Бренд: EASTCOLIGHT Страницы: 8

Бренд: Opticron Страницы: 2

70X50 finder scope with illuminated reticle

Бренд: Vixen Страницы: 2

Бренд: TMB Optical Страницы: 2

Бренд: Sig Sauer Страницы: 20

ETX series AutoStar

Бренд: Meade Страницы: 60

Spolux 20-60x80

Бренд: Bresser Страницы: 8

Бренд: Bresser Страницы: 16

Spotty 20-60x60

Бренд: Bresser Страницы: 42

Бренд: Bresser Страницы: 64

NATIONAL GEOGRAPHIC Series

Бренд: Bresser Страницы: 64

Бренд: Bresser Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды