Celestica A2210, Руководство пользователя, Страница: 22 / 76

U S E R ’ S M A N U A L
6. Reassemble the rail by sliding the outer two beams over the smaller beam
starting from the rear of the server and duplicating the original factory
orientation. It may be necessary to release the retainer latch during this
process. Repeat the process for the other rail.
7. Adjust the slide position until movement is smooth. Tighten all screws and
complete installation.
To remove the chassis from the rack, depress the release lever on each slide.
2.3 Powering On the System
When the server is powered on for the first time after connecting the power cord, the
BIOS automatically powers the system up. On subsequent power-ups, the power
button on the front panel must be pressed.
In the event that the system cannot be powered down normally, pressing and
holding the power button on the front panel for four seconds shuts the system down.
2-4