3. Receiver Address Accessing
1. Pull out the door by using a screwdriver.
2. Set the RF address. The receiver RF address must
match the transmitter RF address.
3. Close and press the door until hearing a
“click” sound.
5
H. Internal Setting Mode:
Hold
and
key to enter internal setting.
Press
or
to switch items and adjust value.
Press
for item selection and confirm.
Press
to exit the setting.
System Mode:
HE
– Heat mode (default)
CL
– Cool mode
Display Unit:
12
– 12 hour display unit
24
– 24 hour display unit (default)
Minimum Off Delay:
Sd
– Short delay (default)
Ld
– Long delay - 5 min.
Temperature Calibration:
-3 - 3
℃
. 0
℃
(default)
RF Address
00000000
– 11111111 (default)
Upper Position: 1
lower Position: 0
e.g
Address: 11110011
low position.
Warning
: Disconnect from supply before
opening the door.
14