19
Factory Reset
In Ready Mode, press START and 0 at the same time. The buzzer will sound once
and CHECK will display in the LED. The screen will display 11 if in factory-default
and after 3 seconds the oven will return to READY mode. If 00 displays, the oven
is not in factory-default. Press Start, the display will show CLEAR and screen will
display 11. Press STOP to return to ready mode.
User Option Mode
1)
Open the oven door and press pad 2 until the buzzer sounds and OP:--
displays in the LED.
2)
Using the chart on Page 11, select the pad for the option you wish to
change. The option will display in the LED with the current selection
showing. If correct press Start to save. Screen returns to OP:--
3)
If you wish to change, press the same pad until the User option number is
displayed and then press Start to save.
Example: To change the buzzer under Option 2, press pad 2. Default if
never changed the display will show OP:22. Press 2 again to go through
OP:23 OP:20 OP:21, stopping when you see the option you require. Press
Start to save.
4)
During the process if you press STOP/Reset you will exit Options Mode and
no changes will be saved.
5)
When you have made and saved all your changes, close the door and the
oven will be back in Ready Mode.
6)
If you do not press Start at the end of each change, it will not save and the
previous setting will be enabled.
USB Function – Upload File from USB to The Oven
1)
During Ready Mode, insert the USB disk that you saved a “UTABLE” file
from the software.
2)
Press USB button to upload the data from the USB to the oven. LOADING
displays in the LED.
3)
If the update is successful the screen will display SUCCESS. Otherwise FAIL
will display.
4)
Press STOP or open the door to finish the process.
