18
Double / Triple Quantity Cooking
1)
Under Ready Mode, press X2 (double) or X3 (triple) and then press number
buttons 0-9. In 5 seconds, the oven will start cooking with the quantity
preset cooking time now multiples by 2 or by 3.
2)
Press X2 and double displays in the LED. Press X3 and triple displays in the
LED. When you press the number pads, the LED will display the preset time
multiplied by X2 or X3.
Example: Pad 5 is set for 1 minute. Press X2 then pad 5 and the 1:00
becomes (1:00 x 2) = 2:00
Example: Pad 5 is set for 1 minute. Press X3 then pad 5 and the 1:00
becomes (1:00 x 3) = 3:00
3)
When the cooking program finishes, the oven will enter End Of Cook Cycle
Mode.
4)
To Change the X2 or X3 factor for a pre-program, when you pre-program
the pad, press X2 or X3 during the programming and the LED will show
CF:XX (if default it will show as CF:10 – 100%). Use the number and save
along with the program. This will change the cook factor for this pad only.
Stage Cooking Programming
This allows the user to cook food items in a combination of various Power levels
on 1 pad.
1)
Three (3) stages can be set under manual cooking mode or in program
mode. Total time of the 3 stages cannot exceed the maximum cook time
allowed per pad.
2)
After setting the time and power level for Stage 1, press Time Entry to get
to Stage 2, and the same to get to Stage 3, setting time and power level for
each stage.
3)
When you press Time Entry S2 or S3 will display in the LED.
4)
If in manual mode, press Start to start cooking. If in program mode, press
Start to lock in the program.
5)
The LED will show the total time of the 3 stages in the display when the
program is started.