manualshive.com logo in svg

Celabs QMPro 1100, Инструкция по эксплуатации

Поделиться
Скачать
Celabs QMPro 1100 Скачать руководство пользователя страница 36

35

VCN Mode: Auto (two-part)- VCN will be set based on the Channel 
output selected in ‘Output Menu: Output Channel’.
Example: Output Channel set to 101. VCN for device will be set at 101.1 
and 102.1

VCN (Minor Ch. No.)-Use the Scroll Up/Down button to enter VCN 
(Minor CH No.) menu. Press the OK button to enter the menu. Use the 
Scroll Up/Down to set the VCN (Minor CH No.) channel #. Range: 1 to 
999. Press OK to set 
 *Use only when VCN Mode: Manual (two-part) is selected in VCN 
Mode menu.

VCN (Major Ch. No.)-Use the Scroll Up/Down button to enter VCN 
(Major CH No.) menu. Press the OK button to enter the menu. Use the 
Scroll Up/Down to set the VCN (Major CH No.) channel #. Range: 1 to 
999. Press OK to set 
*Use only when VCN Mode: Manual (two-part) is selected in VCN 
Mode menu.

VCN (one part): - Use the Scroll Up/Down button to enter VCN (One 
Part) menu. Press the OK button to enter the menu. IUse the Scroll 
Up/Down to set the VCN(One Part) channel #. Range: 1 to 16383. 
Press OK to set 
 Note: Use only when VCN Mode is set to VCN(One Part) in VCN Mode 
menu.

Long Channel Name – Use the Scroll Up/Down button to select 
Long Channel Name. Press the OK button to enter the Long Channel 

Name menu. Use the Scroll Up/Down menu to select the first char

-

acter of the desired Long Channel Name then press the OK button to 
set. Repeat the process until the Long Channel Name is completed. 
Long Channel Name can be 16 characters.
Factory Default: ATSC-digi-TV-101 or ATSC-digi-TV-102.

Short Channel Name – Use the Scroll Up/Down button to select 
Short Channel Name. Press the OK button to enter the Short Channel 

Name menu. Use the Scroll Up/Down menu to select the first char

-

acter of the desired Short Channel Name then press the OK button to 

Содержание QMPro 1100

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды