Celabs QMPro 1100, Инструкция по эксплуатации

Страница: 20 / 48

19
Output Setup
Use the Output Setup page to set the RF output type, RF Output CH/
frequency, Attenuation, QAM, and Interleaver.
1. Enable the RF by checking the checkbox. (Factory Default is en-
abled)
2. Select and set the required parameters for your installation
RF: Normal, C.W., Inverted (Factory Default is Normal)
Channel Type: STD, HRC, IRC (Factory Default is STD) CH/Freq.: Fac-
tory Default is 101.
Attenuation: 0 ~ -20 (Factory Default is 0)
Constellation (QAM Type): 256 QAM, 64 QAM (Factory Default is 256)
Interleaver: Factory Default is I=128, J= 1.
Delayed Audio Output
Use the Delayed Audio Output Parameters to Delay the audio output
of the Encoder in order to better match the video at the TV. This allows
external audio amplifiers to achieve lip sync with RF Displays.
1. Set the Delay Buffer (mS) as required.
2. Select the Program (Program 1 or Program 2) audio to be out-
putted via the L/R Audio outputs on the rear of the device.
Save and Confirm
all changes settings on Output Setup page.