CEL MT3, Руководство пользователя

Страница: 5 / 16

Important Notes 1.0
Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c) Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
e) Extension cords must be rated for intended use. Always fully unwind all cables before operating any equipment. Wound cables can build
heat and be very dangerous. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of cord suitable for
outdoor use reduces the risk of electric shock.
Personal safety
a) Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, and hearing
protection must be used for appropriate conditions and will reduce personal injures.
c) Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying tools with your finger on the switch or plugging
in power tools that have the switch on invites accidents.
d) Remove adjusting key or wrench before turning the tool on. A wrench or a key left attached to a moving part of the tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress appropriately. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of
these devices can reduce dust-related hazards.
Important Notes 1.0
Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power
tool is maintained.
NOTE
~ Always check the tool and all cables and connections are undamaged, clean and dry before plugging in.
~ Always use an RCD or suitable circuit breaker when using power tools.
~ Use the machine only for dry sanding. Penetration of water into the machine increases the risk of an electric shock.
~ Keep hands away from the cutting range. Do not reach under the workpiece. Contact with the accessories can lead to injuries.
~ Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with
electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage
or may cause an electric shock.
~ When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more
securely with both hands.
~ Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more securely than by hand.
~ Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode.
~ Wear protective gloves when changing application tools/accessories. Application tools/accessories become hot after prolonged usage.
~ Do not scrape wetted materials (e. g. wall-paper) or on moist surfaces. Penetration of water into the machine increases the risk of an electric
shock.
~ Do not treat the surface to be worked with solvent-containing fluids. Materials being warmed up by the friction can cause toxic vapours to
develop.
~ Exercise extreme caution when handling the scraper. The accessory is very sharp; danger of injury.
~ Never cut in an area you cannot clearly see. Hidden objects can cause harm or be damaged.
Key risks with oscillating tools:
~ Vibration over long periods can lead to RSI (Repetitive Strain Injury) and a condition known as HAVS (Hand-Arm Vibration Syndrome) or
White Finger. To avoid injury take regular breaks and never operate the tool continuously for more than 20 minutes. Do not use this tool if you
have a history of medical problems that relate to this type of injury or if you are unwell or have any discomfort.
~ Heat buildup on accessories. A rotating blade will clear swarf and saw dust from the cut, the oscillating action of this tool DOES
NOT clear the debris. Constant friction on one spot can cause extreme heat and even fire. Do not touch a blade until it has cooled,
reduce heat from friction and build up of debris by moving the accessory constantly to clear debris and dissipate heat.
~ Don’t use excessive pressure, cutting blades work better at their own pace, sawing, sanding and grinding tools will clog if pressed too hard.
The risk of slipping and causing harm is reduced when using a controlled, even pressure. Keep grinding and sanding pads clear of debris
buildup with a wire brush.
Always wear equipment to protect vision, hearing and respiratory system.
Wear suitable clothing and footwear. Long periods of use can be harmful, take regular breaks.
Description of symbols
The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.
General
Hazard
Keep Dry Keep
Bystanders
Away
Flying
Debris
Sharp
Blades
Protect
Eyes, Ears,
Lungs
Read
Instructions
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The terms “tool”, “machine” or "power tool" in the warnings refers to mains-operated (corded) power tools and their
accessories.
Wear
Appropriate
Clothing