CEL MT3, Руководство пользователя

Страница: 15 / 16

FAQ 10.0
Why does my MultiPRO stop sometimes?
Excessive heat or a jammed accessory will
cause the tool to shut down. Wait for it to
cool down before re-starting.
Why cant I cut/sand as well as
demonstrated?
Grip the tool firmly, the oscillations can be
absorbed by your arm and wrist reducing the
effective cut. Ensure the workpiece is also
securely gripped.
Make sure the cutting tool is in good
condition and the variable speed is at a
suitable level.
The MultiPRO wont start, what’s wrong?
a)Clean as described in the maintenance
section. b)Check the power is live and
correctly connected, check the fuse is valid,
also make sure the switch and speed control
are working and being operated correctly.
What kind of fuse does the plug use?
See the maintenance section of this manual.
Where should I keep my MultiPRO?
In a dry place at a stable temperature
between 10ºC and 24ºC (50ºF and 75ºF).
What should I do if my MultiPRO gets
wet?
Safely remove from any electrical source.
Dry fully for at least 14 days in a warm but
not hot place and ensure there is no residual
moisture before trying to use
.
How can I get my MultiPRO repaired if it
is damaged?
Contact your retailer.
Where do I find my serial number?
On the left hand side of the body.
Where can I get replacement parts,
advice or help?
Ask at your retailer or visit www.cel-
global.com
How long is the warranty and what is
covered?
Please see inside cover
Technical Specifications 11.0
If you experience any problems with the product please contact
email: service@cel-global.com
CEL UK: 08453 88 97 69
www.cel-global.com
©
Copyright C Enterprise Limited 2011 3188076
C Enterprise Limited
READ INSTRUCTION MANUAL
BEWARE OF FLYING
OBJECTS AND DEBRIS GENERAL HAZARD
SAFETY ALERT
KEEP BYSTANDERS AWAY
Oscillating speed
Oscillation angle
Sound Pressure Level (dB(A))
Operating wattage
Operating voltage
Dimensions
Boxed weight
Product Code
- 11000 - 19000rpm
- 3.2°
- 86dB
- 220W
- 240vAC 50Hz
- 353x266x95mm
- approx (14x10x4")
- 1.26Kg (2.8lbs)
- MT3