3. in the dialog window [
Run
] press [
Browse
],
4.
select „
My computer
” and CD-Rom with „
ADANET_DRV
”,
5.
select catalog
Drivers/Windows/Win-XP-7-8,
6.
select file „
Setup.exe
” for 32-bits system or „
Setup64.exe
” for 64-bits and press [
Open
],
7. when the installation window will appear press [
Next
],
8. will start the searching for the wireless serial servers in the network, founded devices will be added to the list.
9.
select the wireless serial servers from the list for installation of virtual port driver and press [
Next
].
10.
in window Describe the device select or not the Starting Com port and press [
Finish
]. The driver will be installed.
The Virtual Serial Port Drivers can be installed without connection of the ADA-14040 to Wi-Fi (WLAN) wireless network and it
is as follow:
1.
press [
Start
] button, select [
Run...
]
2. in the dialog window [
Run
] press [
Browse
]
3. select „
My computer
” and CD-Rom with „
ADANET_DRV
”.
4. select catalog
Drivers/Windows/Win-XP-7-8
.
5. select file „
Setup.exe
” for 32-bits system or „
Setup64.exe
” for 64-bits and press [
Open
].
6. when the installation window will appear press [
Next
] .
7. will start the searching for converters in the network.
8. if no devices were not found press [
Next
].
9. should be set in the window Describe the device:
– IP address for wireless serial server,
– number of installing COM port (No. Ports)
– Starting COM
and press [
Finish
]. The driver will be installed.
In this way installed virtual port can require the configuration in case of connecting the wireless serial server to network.
6.2. REALPORT CONFIGURATION IN WINDOWS XP
After installation of RealPort drivers, can be done configuration by the use the Device Manager of Windows and it is as follow:
1. Press [
Start
], select [
Properties/Setting
], press [
Control Panel
].
2. Double click icon [
Administrative Tools
] and [
Device Manager
]
3. Press [
Ports (COM & LPT)
]. On fig. 33 are shown available serial ports COM1, COM2 and
COM7
marked as
ADA-14040
which
was created after installation of RealPort driver.
4. Then select [
Multi-port Serial Adapter
], there will be the name
ADA-14040
.
5. Double click the name and the window [
Properties
] will appear.
6. Select [
Advanced
] and press [
Properties
].
7. Enter
new name of virtual port for wireless serial server
. In the window [
Advanced Properties
] click [
ADA-14040
] and then
select [
Properties
], press [
Rename Ports
], now it is possible to change the name of virtual port driver for example COM5, COM11
etc. To accept the changes press [
OK
].
8.
Select IP address, MAC, DNS server for communication with virtual port driver
. In the window [
Advanced Properties
] click
[
ADA-14040
] and then select [
Network
] (Fig. 34), and set the
IP address
,
MAC Address
or
DNS name
of the wireless serial server
for communication with virtual port driver.
9. In the next window press [
OK
] to accept the changes.
28
ADA-14040
