HI-PE multi-zone --- Rev.
FI 050 GB 60K10 v2_1
44
ACCESSORIES
RCU
Fig. VII-2
The RCU, connected to the detector via serial line, allows remote programming. It
also provides audible and light-based alarm signalling with a bar-graph indication
proportional to the metal mass detected.
Dimensions: 217x140x75 mm.
Code: 3423
MAIN & BATTERY SUPPLY UNIT
Fig. VII-3
The MAIN & BATTERY SUPPLY UNIT is a portable device for providing power to
CEIA metal detectors in outdoor applications or in particularly difficult
environmental conditions.
The unit comprises two 12V, 7Ah batteries and a charger, and allows about 6
hours independent operation when mains power is not available. Recharging
takes place automatically when mains voltage is present.
Protection level: IP65.
Code: MBSU-1
Personal Effects Depository
Fig. VII-4
This article acts both as a spacer between the X-ray unit and the metal detector
and as a temporary depository for metal personal effects which are not of dubious
nature and therefore not required to undergo X-ray analysis (coins, keys and so
on).
Dimensions: 610 x 360 x 975 mm
Code: 18074
