ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
4
1.0
INTRODUCTION
The practices in this manual provide installation and maintenance information for
Model SSW 321-X Stainless Steel Mini Wall Telephone equipped with the XFD
printed circuit board.
The information in this manual is subject to change without notification.
For information not included in this manual, please call or write:
CEECO
Customer Service
519 West South Park Street
Okeechobee, FL. 34972
(863) 357-0798
(863) 357-0006 FAX
2.0
GENERAL DESCRIPTION
The CEECO Model SSW-321-X Mini Wall telephone is designed for special
applications where a telephone must be both sturdy and attractive. It is equipped
with an XFD printed circuit board and is intended for “ring down” or direct
connect operations. In such applications, the phone acts as the communication
device only and is dependent upon the phone company or the PBX (or similar
device) connecting any calls as desired. This telephone is equipped with a
receiver operated magnetic reed hookswitch, which equates to fewer moving parts
and a more “sealed” construction. Volume control is inherent to the phone. A
volume control button bearing a universal volume symbol is located on the face of
the housing next to the keypad. With each press of the button, the volume
increases one increment. On the fourth press on when the phone is hung up, the
volume resets to normal. Background noise elimination is also inherent to the
unit and may be activated during programming. Programming is performed by
calling this phone from another phone as described in the next section.