ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
7
PROGRAMMING CONTINUED…
NOTE:
A complete programming sequence would appear as follows:
#97#00
00101
#19
18005551212
#01
911. This would set the phone as stated in the
examples under sections 3.7, 3.8 and 3.9. Again notice that the programming
can be accomplished in one continuous.
3.10
When programming is finished, press the
LEFT
black call button to
hang
up
the phone and return the two plastic
mini-jumpers
to the
"OFF"
position, as depicted on the last page of this manual. The phone is now
ready for use.
4.0
OPERATION
4.1
To make a call, press the left or right call located on the front of the phone.
The LED will light red at this time and the preprogrammed number will
dial out. While the phone is ringing, the LED will flash back-and-forth
between red and green. When the called party answers the LED will turn
green after approximately 2-4 seconds. Please note that the ADA feature
will only function on a working telephone line and not on a DTMF test
set. The microphone is active immediately after the preprogrammed
number is released.
4.2
After the call is completed, press the black call button (left) to hang up the
phone. Otherwise the phone will only hang up after detecting the far end
wink back or it times out, if so programmed.
5.0
RECOMMENDED TOOLS AND TEST EQUIPMENT
DTMF test set
Volt/Ohm meter
3/8” Nut Driver
Flat Blade screwdriver
Security Tool (CEECO P/N 301-064)
