background image

TOF/Spot

English

© CEDES | V 4.0

 

3

2.  Safety information

IMPORTANT!

READ BEFORE INSTALLATION!

The TOF/Spot was developed and manufactured using 

state-of-the-art systems and technologies. However, injury 

and damage to the sensor can still occur.

To ensure safe conditions:

 

Read all enclosed instructions and information.

 

Follow the instructions given in this manual carefully. 

 

Observe all warnings included in the documentation 

and attached to the sensor.

 

Do not use the sensor if it is damaged in any way.

 

Keep the instruction manual on site.

The TOF/Spot should only be installed by authorized and 

fully trained personnel! The installer or system integrator is 

fully responsible for the safe integration of the sensor. It is 

the sole responsibility of the planner and/or installer and/

or buyer to ensure that this product is used according to 

all applicable standards, laws and regulations in order to 

ensure safe operation of the whole application.

Any alterations to the device by the buyer, installer or user 

may result in unsafe operating conditions. CEDES is not 

responsible for any liability or warranty claim that results 

from such manipulation.

Failure to follow instructions given in this manual and/

or other documents related to the TOF/Spot may cause 

customer complaints, serious call backs, damage, injury or 

death.

2.1  Non-intended use

The TOF/Spot 

must not be

 used for:

•  Protection of dangerous machine
•  Equipment in explosive atmospheres
•  Equipment in radioactive environments

Use only specific and approved safety devices for such 

applications, otherwise serious injury or death or damage 

to property may occur!

3.  Symbols, safety messages

3.1  Safety messages categories

Warning of serious health risks

WARNING

Serious health risks

Highlights critical information for the safe use 

of the sensor. Disregarding these warnings 

can result in serious injury or death.

 

Follow the measures highlighted by the 

triangle-shaped arrows

 

Consult the safety information in Chapter 

2 of this manual

Caution of possible health risk

CAUTION

Possible health risks

Highlights critical information for the safe use 

of the sensor. Disregarding these warnings 

can result in injury.

 

Follow the measures highlighted by the 

triangle-shaped arrows

 

Consult the safety information in Chapter 

2 of this manual

Notice of damage risk

NOTICE

Risk of damage

Disregarding these notices can lead to 

damage to the sensor, the door controller  

and/or other devices.

 

Follow the measures highlighted by the 

triangle-shaped arrows

Symbol

Meaning

 

 

Single instruction or measures in no 

particular order

1. 

 

2. 

 

3. 

 

Sequenced instructions

•   

List, in no order of importance

à

Reference to a chapter, illustration or 

table within this document

Important

Important information for the correct 

use of the sensor

Содержание TOF/Spot













Отзывы: