Page 9
■
Softkeys (S1, S2, S3)
When first switched on, the soft keys perform the following tasks. For explanations
of the Groups and learn Mode mentioned in this table, please refer to the relevant
sections below.
S1 (DNS On)
Click:
toggle the current channel/group on/off
Press/Hold/release:
preview the current channel/group on/off
Double-click:
toggle global on/off
S2 (Learn)
Click:
start learning on the current channel/group.
Click again to stop
Press/hold/release:
learn on the current channel/group while pressed
Double-click:
toggle global learn
S3 (Detail)
Click:
toggle between Detail and default (summary) views
Press/hold/release:
preview the detail of the current channel/group on the
main screen
■
Channel displays
In basic use, the two bar graphs in each channel display show the incoming
signal level (the left-hand bar) and the maximum amount of attenuation (the right-
hand bar) at any given moment in that channel. These are overlaid with a visual
indication of values of the level and Gain parameters for that channel.
■
Level / Gain knobs
In basic use, these allow you to tell the DnS 8 live how much noise is present in
the signal presented to each input and the amount by which you wish to attenuate
it.
The full range of operations is shown overleaf:
Содержание dns 8 live
Страница 2: ...Page 2 Intentionally left blank ...