Cedar AZX+, Руководство пользователя

Страница: 20 / 36

OPERATING THE AZX+ AZIMUTH CORRECTOR
Introduction
CEDAR
’s Phase/Time correction process uses information common to the left
and right channels of a stereo signal to determine the offset between the
channels. It then recreates the signal with sub-sample accuracy so that the
channels are correctly aligned.
The process has two primary stages:
Q
You or the
AZX
+ determines the timing error
Q
The
AZX
+ corrects the timing error.
To aid rapid setup and accurate processing you can monitor the output:
Q
before or after processing
Q
in stereo
Q
with the left and right channels summed (mono sum)
Q
with the right channel subtracted from the left (mono difference).
The display indicates the time shift being applied to the signal. A positive number
indicates that the right channel is being delayed with respect to the left; a negative
number indicates that the right channel is being advanced relative to the left.
The principal control on the
AZX
+ is the
ADJUST
knob, located to the right of the
TIME SHIFT
display.
PAGE 14