cecotec Total Iron 8500 Implode, Инструкция по эксплуатации, Страница: 23 / 28

TOTAL IRON 8500 IMPLODE / 9000 TURBO-BOOST | 23
ENGLESK
indicator will switch on and off as the iron maintains the selected
temperature during ironing.
Lock button
Place the steam station on the heatproof stand of unit base, then push the
lock button to lock position in order to leave the iron in the base. To unlock
it, push the lock button to unlock position, then you can start ironing. The
whole steam station can be lifted up by grasping the iron’ s handle, provided
that the iron is not locked on the unit base (see Fig.4)
Fig.4
Steam trigger
After pressing the power switch and choosing the desired steam rate, it
will indicate that the device can be used when the steam rate indicator
changes from flashing to steady. Then, press the steam trigger gently so
the steam will be sprayed from the soleplate continuously (see Fig.5). When
the steam trigger is completely loosened, the appliance can only be used for
dry ironing without steam.
Fig. 5
Shot of steam
Press the steam trigger twice within 1 second to activate the shot of steam
function. Then you can use the shot of steam to remove the toughest
creases.
Refill indicator
When the level of water in the tank is low, the indicator will illuminate,
followed by a buzzer and the steam generator will stop working. When this
happens, add water into the tank. For this, remove the water tank and refill
it with water through the filling aperture (see Fig.6), then put the water tank
back in its position.
Fig.6
Descaling indicator
If the descaling indicator light turns on, it means that the steam generator
must be cleaned of any mineral deposits. At this point, descale it following
the steps on the “Cleaning and maintenance” section. When the system
ensures the mineral deposits have been removed, the indicator will switch
off.
Cord slot
When it’s not being used, the steam supply tube and power cord can be