cecotec POWER BLACK TITANIUM 1800 ADVANCE, Инструкция по эксплуатации

Страница: 8 / 10

POWER BLACK TITANIUM 1800 ADVANCE
30
ENGLISH
Note
If no setting is entered within 3 minutes, the icons will turn off. Turn the knob passing through
the centre setting to start the device again.
2.
Turn the knob left to select one of its preset modes: Ice, Smoothie, Sauce, Self-cleaning.
The icon corresponding to the running mode will blink. Press the PULSE button to start or
stop the programme.
3.
Once the programme ends, the device will switch to Standby mode.
4.
To select a new mode, rotate the knob passing through the centre setting and then select
the desired mode.
5.
Turn the knob right to select the desired speed setting: 1-10.
6.
Hold down the PULSE button to activate the PULSE function.
7.
Release the PULSE button to stop the PULSE function.
4. CLEANING AND MAINTENANCE
Cleaning
Always turn the power knob to the 0 position, turn the switch off and unplug the appliance
after each use and before cleaning.
Use water to clean the jug. Do not use abrasive or chemical cleaning agents.
Never immerse the motor base in water.
Use a dry, soft cloth to clean the motor base. Do not clean this part with a wet cloth.
Maintenance
If the product does not operate normally, produces uncommon noises or shakes more than it
normally does, stop using the product and contact the Technical Support Service of Cecotec for
reparation. Do not carry out maintenance tasks yourself.
Storage
After cleaning the device, make sure you dry it thoroughly before storing it.
After using the product, store it in a dry, safe place.
Avoid direct exposure to sun light.
Make sure it is stored in a place out of the reach of children.
5. TECHNICAL SPECIFICATIONS
Product: Power Black Titanium 1800 Advance
Product reference: 04304